CLOIP1Kxxx Series Mini NVR with Pinhole Camera User Guide
Mini NVR Interface
DC 12V – Connect a 12v 500mah power supply to a power outlet
LAN (POE) – Connect an Ethernet (network) cable to a LAN port on your modem.
SD – To save recordings install a Class 10 TF Micro SD Card maximum size 128gb. Please note the SD Card must be formatted as Fat32.
VIN – Supplied Camera Connection (Video Input)
Audio Out – Headphone or speakers
Audio In – Microphone
Network Setup using the Search Tool
On a computer connected to the same network download and install the CLOIPxxxx Search Tool for Windows or MAC from the OzSpy Manual Archives:
- Mac Version: https://www.ozspysupport.com/manuals/cctv/CLOIPxxxx%20Search%20Tool%20for%20Mac%184.108.40.206.zip
- Windows Version: https://www.ozspysupport.com/manuals/cctv/CLOIPxxxx%20Search%20Tool_setup220.127.116.11.exe.zip
With reference to the above Search Tool screenshot select the check box (left) for the camera you wish to modify. On the right side you will now be able to configure the camera to match your network setup.
- The default camera IP Address is 192.168.1.168
- The default Gateway is 192.168.1.1. This must match your modems IP Address exactly.
If your modems IP address is different from the default gateway above it will need to be changed for example:
Gateway 10.0.0.1 also change the camera IP to 10.0.0.168. The first 3 sets of digits must always match the gateway. Another popular Gateway is 192.168.0.1 therefore set the IP to 192.168.0.168.
NOTE: Every IP address on Network must be unique so if you have additional cameras or another device using that number change the last 3 digits to say 169… 170… 171, etc
To apply the changes, you will need to enter the cameras username and password. Defaults are admin for both and click modify. Allow a few minutes for the details to change and the camera to reboot.
Web Interface and Bitvision App Configuration:
Using Internet Explorer (Chrome, Firefox, Microsoft Edge, etc are not supported) type the cameras IP Address (default 192.168.1.168) into the address bar and enter. If you are asked to install a plug in please accept, install and then reopen the page. Enter the camera Username and Password admin (default) to login.
From the on screen menu go to: Configuration > Network > Advance Setup > P2P
Using your smartphone or tablet scan the relevant QR Code to download and install the Bitvision App.
- Account login – Prior to first use register an account using a valid email address and create a password of your choice. Login once registration has been completed.
- Add device – Select “Device” from the menu. On the new screen select the “+” and “Add Device”. “SN Add” will enable the QR scanner. Scan the Serial Number QR Code from the P2P Web Interface or printed on the label on the product box. The serial number can also be entered manually by selecting “input” located on the top right. Enter the username (default: admin), password (default: admin) and the captcha verification code (printed on the label on the box), and “Submit”. Set a device name (Home, Work, Camera etc) and a group, click “Finish”.
- Live preview and Playback – Open the “Real time” main display. Select a preview box and select the device to be displayed. The window will expand listing all available cameras and devices. Check boxes will toggle on or off the cameras to be displayed. Select “Done” to load the cameras live feed. To Playback recorded footage repeat the same steps from the “Playback” screen to load the cameras. Select the calendar icon (top right) to select the date. The playback timeline bar is located at the bottom of the screen.
Note: Bitvision can also be accessed via their website. Use your registered account details to login: https://www.bitvision.app/
Factory Reset: Should the device become unstable please try a Factory Reset. Carefully insert a small pin like object into the reset button.
Supported Models SKU: CLOIP1KPHR, CLOIP1KPHF
Full detailed manuals can be viewed or downloaded from our manual archive:
- Bitvision App : https://www.ozspysupport.com/manuals/cctv/CLOxxxx%20BitVision%20App%20User%20Manual%20v18.104.22.168.pdf
- Search Tool Full Manual: https://www.ozspysupport.com/manuals/cctv/CLOIPxxxx%20Search%20Tool%20User%20Manual%20for%20Win%20&%20Mac%22.214.171.124.pdf